Double Glazed Window Repair
Double glazing is an energy efficient investment that prevents loss of heat during winter and keeps your home cooler in the summer. Double glazing windows repaired as needed is a great method to ensure they are operating correctly.
Over time, condensation and misting can affect your double-glazed windows. Double glazed windows can become difficult to open and close.
Broken Panes
A unruly ball or a stone flying from your lawnmowers, or a storm that is strong enough can break your double-pane windows which can expose your home to the elements. Even though a glass window that has been damaged is difficult to repair, it doesn't need to be replaced. The insulated glass that is between two panes of glass is in good condition, so you can repair your double-paned windows yourself.
You'll first need to remove any broken glass from the frame. You'll need to be cautious to avoid any glass shards falling to the floor or falling off the frame. Wear gloves for you hands, and a rag to cover the broken glass to avoid further cuts or damage. After removing the broken glass, carefully clean the entire frame of the window to remove any remaining sealant and debris. Sand rough areas of the window frame to create a smooth surface on which to put in your new glass.
After cleaning the frame, you can apply another layer of glass on the seam where you removed the broken pane. This is the best method to protect and seal your window, and will save you money by preventing water and drafts from entering your home. Next, you will need to select your glazing material. There are many options available, including clear tape that is more durable than regular tape, and can prevent further cracking of your window, or glazing film that is similar to clear plastic wrapping. The benefit of this type of material is that it can be painted over to match the frame you have, and it will keep out snow and rain as well.
Whatever double glazing Southgate choose it's essential to press the glazier's points into the gap where the putty meets your frame. These will hold the newly-formed glass in place and aid it adhere to the frame. The glazier's point can be found in hardware stores, and they are available in pre-made ropes which you roll onto the frame rabbets.
Condensation
Double glazing is susceptible to condensation issues. If you encounter this issue, it is best to call the company that provided the window. Many companies offer warranties and guarantees that will cover these problems. Fogging or condensation between the panes of your windows is a sign that your seals aren't working properly. Only an expert can fix this problem by replacing the panes.
This procedure is a bit complicated and requires special tools to remove the old one and replace the new one, however it can be accomplished by a professional who will provide the required equipment. It is best to delegate the task to professionals. These tools can be dangerous.
If you decide to do it yourself, ensure you wear gloves and safety glasses to protect yourself from broken pieces of glass that might fly away during the process. It is essential to take out all metal or putty points from the grooves that will be receiving the new window. It is also recommended to brush the frame with wire, and then vacuum or wipe it clean with a damp cloth. After the frame has dried it is time to order an additional piece of glass that's 1/8" shorter in both directions than the existing window. Test-fit the glass into the grooves.
You will require a layer of silicone caulk into the grooves of frames to ensure your glass is properly installed. After the silicone caulk is dried and cured, you can smooth it out and make any adjustments. Then the wood molding can be reinstalled.
Double-glazed windows can become difficult to open or close when the weather is extremely changing. Extreme temperatures can cause frames to expand or shrink and this can make them sag or stick. You can try wiping down the frames with water and lubricating them in the event that this happens however, it's better to seek advice from the company who installed your windows.
Misted
When moisture gets trapped in between the glass panes, it can cause misty double glazing. Double glazing consists of two glass panes that are separated by an insulating space typically filled with argon gas to provide improved thermal efficiency. This creates an airtight seal that keeps warm room air inside and cold outdoor air outside which allows you to keep the temperature comfortable in your home.
As time passes, the seal will begin to break down and moisture will start to build up between the window panes, causing them to become cloudy. This happens because the gap between the panes gets heated by the sun, which causes water vapour to build up within it.
This is a normal thing to happen, but when it occurs between the window panes it can cause a problem as it is no longer able to regulate the temperature of the room and will allow the outside temperature to affect the indoor temperature. If you notice that your double-glazed windows are turning blurred, call the experts at Northfield Glass to investigate.
We can replace a single blown sealed unit, without having to replace the entire window. This is more streamlined than a total replacement. Our misty window repair involves removing the glass unit, cleaning it, and then replacing it with a new one to create an airtight seal.
There are companies in the industry that claim to drill holes into your windows that are misting and inject chemicals into them, which they claim will eliminate the fog & condensation but we do not recommend this method. This is not only unattractive, but it could cause damage to the toughened glass and can leave you with windows that don't completely perform its function.
If you don't fix the issue quickly it could cause mold, which could not only harm the window, but pose health risks to your family members. Moisture can also cause issues within your home, such as dampness or rot. In certain cases the window might need to be replaced completely.
Blown or Failed
Double-glazed windows are comprised of two panes of glass with an inert or air between them. This improves their thermal efficiency by keeping heat in and the cold out. As time passes, the gas can become depressurised and cause a variety of problems.
One of the most common is condensation between the panes. It's not a sign of a window failing, but it could indicate that you should replace the panes. Condensation can also be an indication of broken double glazing that will need to be replaced.
Double-glazed windows can also cause drafts. This could be due to the seal being damaged or handle that is broken, or a broken lock. It is crucial to address the issue as quickly as possible. A draught will cause you to pay more for heating. Test the seals on the window frame by feeling the cold air.
Another indication that your window seals have failed is when you begin to see water dripping on the inside of your windows. This is a clear indication that you need to replace the seals on your double-glazed windows.
Your window frames are made to move a bit, as they need to do in order to keep the glass sheets in the right place. However, over time this special packaging material may become compacted and this will break the all-important seal. This will allow air to circulate between the panes and reduce the efficiency of your window.
A damaged seal is a clear indication that your double glazing is damaged and needs to be fixed immediately. A damaged seal can stop your double glazing performing its primary function that is to keep cold air out and warm air in. A blown seal could let moisture in your home, which can lead to mold and other unpleasant conditions. You should call a double glazing repair specialist immediately if you notice a blown seal in your double glazed windows, since they could replace the whole unit.